Microtest MICROSCANNER Guía de usuario descargar pdf (Pagina 13)

MICROSCANNER

ENGLISH - 13

activate the blinking Hub light.

The word SIGNAL blinks once every two seconds

right below the word Hub. Go to the wiring closet

to view a light that blinks once every two seconds

at the port to which the cable is connected.

MICROSCANNER detects the kind of hub it is

connected to: 10, 100, or 10/100 alternately will

be displayed right after the word Hub. The

number is followed by the letters F and/or H as an

indication for the hub's full or half duplex capabili-

ties. Descriptions are as follows:

10 H - 10BASE-T

10 HF - 10BASE-T full duplex

100 H - 100BASE-TX

100 HF - 100BASE-T full duplex

100 HF4 - 100BASE-T full duplex, 100BASE-T4

MICROSCANNER also Identifies workstations.

1. Connect the cable to be tested to the MAIN

jack (identified on the unit right above the

modular 8 jack).

2. To display the length screen, press the

MODE key until the word LENGTH appears

on the screen. MICROSCANNER displays

the word PC followed by the length to the

PC.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Microtest MICROSCANNER Guía de usuario Pagina 13